Cisco 6823 Single Handset DECT Bundle

Product description

The Cisco IP DECT 6823 Handset

Designed for use with the Cisco IP DECT DBS110 Single-Cell Base Station, Cisco IP DECT DBS-210 Multi-Cell Base Station, and Cisco IP DECT Phone RPT110 Repeater.

Together, these products enable the convenience of a mobile DECT solution for Voice-over-IP (VoIP) service. The Cisco IP DECT 6800 Series supports many phone numbers and handsets in a system that can grow from a small storefront to cover the largest locations by adding more base stations and repeaters to the network.

Installing the system is straightforward in most locations: please consult the deployment guide, which offers best practices for a successful deployment. Each handset comes with a site survey tool that provides a graphical green, yellow or red indicator of signal strength throughout the workplace. Base stations and repeaters may be wall or surface mounted with an optional mounting kit or set up to stand on a table or shelf with a stand included in each box. Each handset supports one or two lines and systems may be installed to enable a few, dozens, or hundreds of handsets.

The 6823 handset has a sleek, comfortable design that clips to a belt or fits easily into a user’s pocket as they move about the workplace. The high resolution, graphical color display provides an intuitive user experience: calls may be answered quickly, and features such as transfer, conference, and hold may be activated with confidence. Each handset supports wideband audio, and long talk time in an attractively priced, high-performance system. 

Cisco IP DECT DBS110 Single-Cell Base Station

The Cisco IP DECT DBS-110 Single-Cell Base Station allows up to 30 SIP registrations per unit and up to 2 base stations and 12 repeaters per system. At its maximum size a DBS-110 system supports 20 concurrent narrowband or 10 concurrent wideband calls.

DECT 110 Single-Cell Base Station:

• Up to 30 SIP Registrations
• Up to 10 Concurrent Calls
• Up to 6 Repeaters

Multi-Cell mode: (2 Base stations)

• Up to 30 SIP Registrations
• Up to 20 Concurrent calls
• Up to 12 Repeaters

 

Ergonomic design

An easy-to-use interface that provides a traditional Digital Enhanced Cordless Telecommunication (DECT) telephony-like user experience

 

Graphical display

1.7 in. (4.3 cm) 128 x 160 pixels, 64K TFT display

6825: 2.0 in. (5.0 cm) 240 x 320 pixels, 64K TFT display

 

Headset

6823: 3.5 mm wired headset, iPhone compliant

 

Volume control

A volume-control toggle provides easy decibel-level adjustments of the handset, monitor speaker, and ringer

 

Full-duplex speakerphone

A full-duplex speakerphone gives you flexibility in placing and receiving calls. For added security, the Audible Dual-Tone Multi-Frequency (DTMF) tones are masked when the speakerphone mode is used

 

Handset charging cradle

The charging cradle holds the phone in a single position. The charging cradle comes with a USB Type-A connector to directly connect the power adapter of your choice (see ordering information in Table 6 in this document). The charging adapter is 5V, 2A

 

Keys

28 total keys

0-9, # and * keys

3 soft keys

Five-way navigation and select

Answer and end call keys

1 alarm key on top of the device

Volume up and down keys

Mute key

 

Speakerphone key

Menu key

Power

Battery type: rechargeable Lithium Ion

Cradle charging time: 6 hours

Talk time: 17 hours (NB), 12 hours (WB)


Idle time: 200 hours

Full lines supported

6823 and 6825: 2 lines (SIP registrations)

 

CODECs

 

6823 and 6825 Handset:

• G722 codec for HD audio
• G726 codec for narrow band audio
• HD audio speakerphone

Multiple ring tones

The phones support user-adjustable ring tones

Security

CAT-iq 2.1 security support

Physical dimensions (H x W x D)

4.6 in. x 1.8 in. x 0.78 in. (117 mm x 46 mm x 20 mm)

Weight

6823 and 6825: 3 oz. (86 g)

Display

6823: 1.7 in. (4.3 cm) 128 x 160 pixels, 64K TFT display

Power requirements

5V/2A, Type USB-A for power and additional power adapter for charging the handset. Interoperable optional AC-to-DC country-specific power supplies (such as the CP-6825-PWR-NA= for North America)

 

Regulatory compliance:

◦      CE Markings per directives 2014/30/EU and 2014/35/EU

 

Safety:

◦      IEC60950-1:2005 (2nd Edition); AM1:2009 (CE, U.S. and Canada)

◦      EN60950-1:2006/ A1:2010 + A11:2009 +A1 2010 +A12: 2011 +A2: 2013 (Australia and New Zealand)

◦      CB Certificate

◦      UL 62368-1 (U.S., Canada)

◦      UL 60950-1 (U.S., Canada)

◦      EU EMC EN301489-1 V2.2.0, EN 301489-6 V2.2.0, EN 301 489-3 v2.1.1 and EN 301 489-17 v3.2.0 (CE)

◦      EU SAR EN/IEC 61109-1/-2 including EN50360: A1 2010, EN 50385: 2002 (CE)

◦      EU RF EN301406 V2.2.2, EN 300 328 v2.1.1; EN 301 893 v2.1.1 and EN 300 440 v2.1.1 (CE)

◦      AU EMC (CISPR 32)

◦      AU Safety AS/NZS 60950-1:2011

◦      AU SAR EN/IEC 62209-1 (same as EU)

◦      US FCC Part 15D

◦      US FCC ID certificate

◦      US SAR OET 65 IEEE 1528

◦      CA ICES-003 Issue 5:2012

◦      CA RSS-213 Issue 2:2015

◦      CA IC certificate

◦      CA RSS-102 (SAR)

◦      CA IC REL registration

Industry standards: Cat IQ 2.1 compliant